Coated vs Uncoated Paper: Which One Should You Choose?

Synthetic preparation worksheet v1 — 25 October 2026. Not a physical sample, app screenshot, certification or fulfilled order.

A use-first comparison

Writing or stamping: compare the actual pen or stamp on each stock and finish. Image detail: compare the same image at the same printed size. Glare: tilt both samples under the lighting where they will be read. Handling: compare fingerprints, folds and scuffing after the same handling routine.

A coating is part of the paper surface treatment; lamination is an additional film finish. Ask for both separately. A stock name without its finish and weight is not a complete sample specification.

Make a small comparison you can trust

Label sample A and sample B with manufacturer, stock, GSM, coating, lamination and print process. Write the same short line, let each dry for the same recorded interval, then inspect smearing and readability. Record the pen model and whether the writing is on ink coverage or bare paper.

No physical stock or pen test was performed for this guide. This is a comparison protocol, not a claim that any current BizBee stock passes it. Request a manufacturer technical sheet for the exact proposed material before using a sample result to approve a run.

Record your decision

• ☐ Exact stock and finish identified — Notes: ____________________
• ☐ Writing area tested with intended instrument — Notes: ____________________
• ☐ Glare and handling judged in intended use — Notes: ____________________

Approved filename/revision: ____________________

Reviewer/date: ____________________